Bruker CounterTop XRF User Manual Download Page 9

Page: 9 / 67

S1 TITAN, T

RACER

5, and CTX User Manual

030.0112.04.0

9 of 67

Accessories

The following table, in alphabetical order, describes accessories available for purchase. For
details, see the

Accessories Manual

, Bruker document 030.0116.

Accessory

Part #

Description

Background Plate

485251-000

Eliminates interference from materials behind or around
a small sample and absorbs X-rays.

Barcode Reader,
Socket CHS 7Ci

200.0050

Scans a barcode and displays the alphanumeric
characters on the instrument screen.

Benchtop Stand, S1
TITAN

200.0058

Provides interlocks and stability for measuring small and
medium samples.

Benchtop Stand,
T

RACER

200.0114

Provides interlocks and stability for measuring small and
medium samples.

Camera

n/a

Photographs samples. This feature is standard with the
T

RACER

Desktop Stand, S1
TITAN

200.0057

Provides stability for measuring small samples.

Desktop Stand,
T

RACER

200.0093

Provides stability for measuring small samples.

Extension Pole

200.0071

Allows the instrument to measure from several feet
away from a user and at ground level while user stands.

GPS, Dual
XGPS150A

160.0074

Stores the longitude, latitude, and altitude with each
measurement.

Helium Flush,
T

RACER

5 only

160.0201

Increases low energy measurement accuracy by
replacing air from between a sample and the detector
with helium.

Printer, Honeywell
Intermec PB31

200.0051

Prints screen shots from an instrument.

Soil Foot

160.0138

Allows the instrument to stand alone at a right angle for
a horizontal sample and can connect to an extension
pole.

Tripod Bracket, rail
mounted, T

RACER

only

150.0268

Attaches the new T

RACER

5 to a legacy tripod.

Tripod Kit, linear
and 3D arms

200.0072

Allows the instrument to be firmly mounted and
positioned.

Tripod Kit, linear
arm

200.0113

Allows the instrument to be firmly mounted and
positioned.

Vacuum Pump,
T

RACER

5 only

200.0090

Increases low energy measurement accuracy by
removing air from between a sample and the detector.

Weld Adapter, S1
TITAN

150.0140

Provides a groove for aligning a weld bead or weld rod.

Weld Adapter,
T

RACER

150.0259

Provides a groove for aligning a weld bead or weld rod.

Your Complete Source for

Testing Equipment

www.BergEng.com

Berg Engineering & Sales Company, Inc.

1-847-577-3980

[email protected]

Summary of Contents for CounterTop XRF




































































Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands

Bruker CounterTop XRF, User Manual

Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands