Bruker CounterTop XRF User Manual Download Page 18

Page: 18 / 67

S1 TITAN, T

RACER

5, and CTX User Manual

030.0112.04.0

18 of 67

Remaining
charge for
handheld

To check the charge remaining on a battery for a handheld instrument –

On the “Bruker” side of the battery, push the white button on the left. Green lights indicate the
approximate remaining charge in percent.

CTX battery

The battery door is on the back of the CTX.

Battery door

Battery

Remaining
charge for CTX

The remaining charge on a CTX battery is displayed on the side. The following is a fully charged
battery.

Charging

To charge a battery –

Step

Action

To prolong battery life, ensure that the ambient temperature during charging is
b5 °C and +45 °C (40 °F to 115 °F).

Plug power adapter into back of charger.

Plug power cord into power adapter.

Plug power cord into a wall outlet.

Insert battery into charger with the Bruker name on the left side.

To charge a CTX

battery

, first remove the insert from the charger.

Your Complete Source for

Testing Equipment

www.BergEng.com

Berg Engineering & Sales Company, Inc.

1-847-577-3980

[email protected]

Summary of Contents for CounterTop XRF




































































Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands

Bruker CounterTop XRF, User Manual

Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands