Bruker CounterTop XRF User Manual Download Page 14

Page: 14 / 67

S1 TITAN, T

RACER

5, and CTX User Manual

030.0112.04.0

14 of 67

1.3.

General Care and Maintenance

Low
maintenance

The instrument, when used properly, should require very little maintenance beyond –



Battery recharging. See

Power Sources

, page 15.



Window replacement. See below.



Quality checking. See

Quality Check

, page 61.

Touch screen

The touch screen uses sensitive electronics and should be cleaned regularly using a soft, lint-free
or microfiber cloth.

Do not –



Use cleaners as they may damage the screen.



Use compressed air.



Leave the analyzer where the touch screen is exposed to direct sunlight.

Cleaning
exterior

If the exterior of the analyzer becomes dirty, wipe it gently with a damp, lint-free cloth.

Avoid

harsh solvents and compressed air.

1.4.

Changing Windows

Description

The window in front of the detector is delicate, only 4 µm thick Prolene™, and periodically
requires replacement.

Never touch or use compressed air on the detector. The detector window is 8µm Be, fragile, and
expensive.

Detector

Your Complete Source for

Testing Equipment

www.BergEng.com

Berg Engineering & Sales Company, Inc.

1-847-577-3980

[email protected]

Summary of Contents for CounterTop XRF




































































Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands

Bruker CounterTop XRF, User Manual

Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands