26
Routine Service
Battery and Battery Connections
Use
Evinrude
Diagnostics
software to adjust net-
work settings in the
EMM
. From the
Settings
screen, select
Engine Options
.
Water Pressure Gauge
To display engine water pressure, install a water
pressure hose fitting in the cylinder block as
shown.
Use
Pipe Sealant with Teflon
on the threads of the
hose fitting. Refer to installation instructions sup-
plied with gauge.
For an
I-Command
water pressure display, sev-
eral water pressure sensor kits are available.
Refer to the
Evinrude/Johnson Genuine Parts
and Accessories
catalog.
Battery and Battery Con-
nections
Each outboard requires its own starting battery.
Select a battery that meets or exceeds the mini-
mum requirements.
Battery Recommendations
The battery charging system of
Evinrude
out-
boards is designed for use with lead acid type bat-
teries only, including "AGM" and "Gel" type
batteries. If other battery types, such as lithium ion
batteries are used with an
Evinrude
outboard,
installation of additional equipment may be
required as defined by the battery manufacturer.
When installing lithium ion batteries, installers
MUST correctly install the batteries and the
required battery chargers specified by the battery
manufacturer. Upon delivery, be sure to advise
customers that lithium ion batteries and battery
chargers MUST be properly maintained and
review the battery manufacturer's instructions with
the customer.
Engine Options Screen
008563A
1.
Water pressure hose fitting
002461
1
WARNING
Battery electrolyte is acidic—handle with
care. If electrolyte contacts any part of the
body, immediately flush with water and seek
medical attention.
WARNING
American Boat and Yacht Council (ABYC)
specifications state:
"Lithium Ion Battery systems pose different
risks from those encountered with lead acid
batteries and should only be installed and
maintained in accordance with manufac-
turer's recommendations."
Failure to follow the battery manufacturer rec-
ommendations may cause the battery to fail,
resulting in a fire or explosion, property dam-
age, and serious injury or death.
Summary of Contents for Evinrude E-TEC
