BRP Evinrude E-TEC, Manual

Page: 9 / 364

Reference Information
Emission-Related Installation Instructions
9
1
The owner/operator is not to, and should not allow anyone to, modify the outboard in any manner that
would alter the horsepower or allow emissions levels to exceed their predetermined factory specifica-
tions.
Tampering with the fuel system to change horsepower or modify emission levels beyond factory settings
or specifications will void the product warranty.
EPA Emission Regulations
All new 1999 and more recent Evinrude outboards are certified to the EPA as conforming to the require-
ments of the regulations for the control of air pollution from new watercraft marine spark ignition out-
boards. This certification is contingent on certain adjustments being set to factory standards. For this
reason, the factory procedure for servicing the product must be strictly followed and, whenever practical,
returned to the original intent of the design. The responsibilities listed above are general and in no way a
complete listing of the rules and regulations pertaining to the EPA requirements on exhaust emissions
for marine products. For more detailed information on this subject, you may contact the following loca-
tions:
U.S. Environmental Protection Agency
Office of Transportation and Air Quality
Certification Division
Gasoline Engine Compliance Center
2000 Traverwood Drive
Ann Arbor, MI 48105
EPA Internet Web Site:
www.epa.gov/otaq