![BRP Evinrude E-TEC Manual Download Page 323](http://html1.mh-extra.com/html/brp/evinrude-e-tec/evinrude-e-tec_manual_2820522323.webp)
323
Manual Starter
Recoil Starter Installation
13
Recoil Starter Installation
Apply
Nut Lock
to the threads of starter ratchet
screws. Install washers and ratchet on flywheel.
Tighten screws to a torque of 120 to 144 in. lbs.
(13.5 to 16 N·m).
Place the starter assembly onto the outboard.
Install the starter housing retaining screws, wash-
ers, and lock washers. Be sure to place washers
between the starter housing and the flywheel
cover. Apply
Ultra Lock
to threads and tighten the
three starter housing screws to a torque of 120 to
144 in. lbs. (14 to 16 N·m).
Install clamp for oiling system wiring harness.
006654
1.
Starter housing screws (3)
2.
Clamp
002515
2
1
1
1
Summary of Contents for Evinrude E-TEC
