Brother LZ2-B855E, Instruction Manual

Page: 184 / 222

LZ2-B855E,B856E 165
The ▲ mark indicates factory default settings.
■ DIPSW1
(Table 1) maximum sewing speed limit (rpm)
■ DIPSW2
12. STANDARD ADJUSTMENTS
12. STANDARDEINSTELLUNGEN
12. REGLAGES STANDARD
12. AJUSTES ESTANDARES
DIPSW1-6 OFF ON OFF ON OFF ON ▲ OFF ON
DIPSW1-7 OFF OFF ON ON OFF OFF ▲ ON ON
DIPSW1-8 OFF OFF OFF OFF ON ON ▲ ON ON
Maximum sewing speed 1000 2000 2500 3000 3500 4000 ▲ 4500 5000
Treadle specifications Domestic Japan ▲ Export
(Spare) ▲ Do not set to ON Do not set to ON
Automatic presser lifter ▲ Not used Used
(Spare) ▲ Do not set to ON Do not set to ON
Motor operation when “UP” displayed ▲ Does not operate (turning by hand only) Operates (treadle depressed backwards, half stitch key)
Maximum sewing speed limit Table 1 below Table 1 below
Maximum sewing speed limit Table 1 below Table 1 below
Maximum sewing speed limit Table 1 below Table 1 below
No. Function Operation when OFF Operation when ON
1
2
3
4
5
6
7
8
(Table 2) Zigzag width limit
Do not make this setting.
(Table 3) Sewing start position after the SET key is pressed to accept a setting
Zigzag stop position Left stopping No position specified Right stopping
DIPSW2-3
▲ OFF Left Left Right
▲ ON Right Right Left
* ... When the panel is locked,
`||
is displayed at all times.
Zigzag width limit Table 2 below Table 2 below
Zigzag width limit Table 2 below Table 2 below
Sewing start position ▲ Table 3 below Table 3 below
Needle zigzagging when
▲ OFF ON
treadle is depressed backward
. Backtack zigzag width setting Enabled ▲ Disabled
Voltage specifications 220V, 230V, 240V, 380V, 400V 110V
(Spare) ▲ Do not set to ON Do not set to ON
Panel key lock ▲ Not locked Locked (panel key inputs ignored) *
No. Function Operation when OFF Operation when ON
1
2
3
4
5
6
7
8
DIPSW2-1 ON ▲ ON OFF OFF
DIPSW2-2 ON ▲ OFF ON OFF
Maximum zigzag width ▲ 8mm 5mm 3mm