Brother HL-2700CN Series, Service Manual, Page: 50 / 377

III-10
CAUTION
Prior to unplugging the power cord, confirm that the power switch has been set as OFF
condition. Strictly refrain from turning off the power switch or unplugging the power cord
while the printer is operating the printing job. Wait at least 5 seconds immediately after
turning off the printer power switch.
3.4.2 Test Print
After power-on, confirm the normal printing by test printing according to the following
procedures:
(1). Procedure of Test Print
Step Operation Details of Operation
1
Upon completion of the warming-up process,
printer is ready to print and waits for PRINT
signal. [See the power-on in Section 3.4.1.]
2 Test Print
See Item (2) "Test
Print Procedures"
for details.
Printer has the following built-in print patterns
for test printing.
1). Grid Pattern :
Available in mono color print of Y, M, C, K,
and two color print of R, G, B.
2). Stripe Pattern:
Available in color print of Y, M,
C, K, R, G, B.
GRID
STRIPE
Y
M
C
R
G
B
K
Power-on