Brother HL-2700CN Series, Service Manual

Page: 165 / 377

V-40
49 NEXT LIFE SET
This mode is to set the replacement timing (number of prints) of periodic replacement
parts.
Description of Procedures LCD Message
1) After selecting NEXT LIFE SET, press Set
key. (b) → (f)
2) After selecting the code to be set, press Set
key.
(Example : Belt Cartridge)
7: Belt Cartridge (BC)
8: Fuser Unit (FU)
9: Transfer Belt (TB)
10: 120K Volume Stack Kit (OW)
13: Pick-up Roller (PK)
14: Pick-up Roller (PL)
(b) → (c)
3) Designate or alter the figure with Back and +
keys. (b) → (c)
Use Set key to input the number to the
blinking figure. (for example, 120,000)
After inputting the desired number (120,000
as example), move the cursor to SET with
Back and + keys.
Then, press Set key to complete the
registration of desired number (120,000 as
example). (c) → (d) (e)
4) Press - key to complete the procedure of
NEXT LIFE SET. (e) → (f)
39 FACTORY MODE
NEXT LIFE SET
39 FACTORY MODE
MARGIN ADJUST
(a)
(b)
(c)
PERIOD BL UNIT
1 2 0 0 0 0 P SET
49 NEXT LIFE SET
1 2 3 4 5 6 7 8 9 10 12 16
(e)
PERIOD BL UNIT
1 2 0 0 0 0 P SET
(d)
49 NEXT LIFE SET
1 2 3 4 5 6 7 8 9 10 12 16
(f)