Brother HL-2700CN Series, Service Manual, Page: 138 / 377

V-13
Code No. LCD Message Description of Message
00
00 READY [*1]
[*2 ] [*4]
• Engine has completed the warming-
up process and now is ready to print.
• Engine is ready to receive "PRREQ",
signal from LPC.
[*1]: Applicable paper feeder is indicated
as follows;
/UPP: Upper Tray
/LOW: Lower Tray
/DPL: Duplex Unit
[*2]: Size of the paper loaded on the
upper or lower tray is indicated as
follows. Indication to be displayed
from the left in the order of Upper
Tray, Lower Tray.
LT…Letter size DL…Envelope
EX…Executive size PC…Post Card
LG…Legal size CM…Envelope
Commercial #10
A4…A4 size FR…Free size
B5…B5 size
[*4]: Code numbers of the consumables
or periodical replacement parts will
be indicated if they reach to their
life or should be replaced now. If no
periodical replacement is required,
there will be no indication in the
LCD.
For details of the periodical
replacement parts, see 36. CLEAR
CARE in the next section.
01
01 WAIT [*1]
[*2 ] [*4]
• Alarm LED is lit.
• Engine is in the process of warming-
up.
• For messages [*1], [*2] and [*4] that
appearing in the LCD, see the
description of code number 00 above.
02
02 PRINT [*5][*1]
[*2 ] [*4]
• Alarm LED is lit.
• Engine is ready to print.
• For messages [*1], [*2], [*3] and [*4]
that appearing in the LCD, see the
description of code number 00 above.
[*5]: Print color is indicated as follows;
Y:
Yellow
M: Magenta
C: Cyan
K: Black
YM: Yellow & Magenta
YMCK Full Color