Brother HL-2700CN Series, Service Manual

Page: 154 / 377

V-29
43 MARGIN ADJUST
The position of top margin and left margin can be confirmed and adjusted within the
range between -3.5mm max. and +3.5mm max.
Procedure
Description of Procedures LCD Message
1) Press Set key after selecting MARGIN
ADJUST. (a) → (b)
2) Using Back and + keys, select either TOP or
LEFT1/ LEFT3, and then, press Set key. (b)
→ (c)
LEFT: For adjustment of left edge of
upper tray.
LEFT1: For adjustment of left edge of
lower tray.
LEFT3: For adjustment of left edge from
duplex unit.
3) Margin can be adjusted 3.5mm max. to both
end (left and right) by 0.5mm pitch against
the reference value "0".
Using Back and + keys, select amount of
adjustment by picking up a number
displayed in Screen (c) or (d). In this
instance, the amount of adjustment selected
will be displayed at the upper right corner of
Screen (c) or (d).
After confirming the desired amount of
adjustment displayed, press Set key to set
the adjustment.
4) Press the - key to terminate MARGIN
ADJUST mode. (d) → (e)
5) Press the - key one more time to return to
FACTORY MODE. (e) → (f)
39 FACTORY MODE
MARGIN ADJUST
43 MARGIN ADJUST
TOP/LEFT/LEFT1/
NONE/LEFT3
43 TOP -2.0mm
- < 7 6 5 4 3 2 1 0 1 > +
(a)
(b)
(c)
43 TOP +2.5mm
- < 1 0 1 2 3 4 5 6 7 > +
(d)
43 MARGIN ADJUST
TOP/LEFT/LEFT1/
NONE/LEFT3
(e)
39 FACTORY MODE
MARGIN ADJUST
(f )