Brother HL-2700CN Series, Service Manual, Page: 357 / 377

A-15
OEM FONT SELECT
The special character set is necessary when the printer is supplied to the
European countries. For the HL-1260 printer, the special character set is stored
into the program ROM additionally. Since the font number is moved due to the
addition, the character set is disabled for the normal model.
OEM FONT = DISABL* Disables to select the European character.
OEM FONT = ENABLE Enables to select the European character.
BRO FONT SELECT
The Brougham bitmap font of 10 pitch and 12 pitch is built in due to the user’s
request.
BROBITM = DISABL* Disables the internal 10/12 pitch Brougham
bitmap font.
BROBITM = ENABLE Enables the internal 10/12 pitch Brougham
bitmap font.
ISR FONT SELECT
ISRFONT = DISABLE Normal mode
ISRFONT = ENABLE Israel mode
300DPI PRIORITY
Though it was necessary to select and print the cartridge font of Courier for the
US customer, the 300dpi bitmap font could not be selected because the priority
of the font selection was low in rank. Since the current model is compatible with
HP LaserJet 4, the setting is added, which disables the compatibility with HP
LaserJet 4 and makes the priority of the 300dpi bitmap font high.
3B PRIO = LOW *
Makes the priority of selection for the 300dpi
bitmap font standard (low) in the font setting.
Command: <ESC><CR>!1T
3B PRIO = HIGH Makes the priority of selection for the 300dpi
bitmap font high in the font setting.
Command: <ESC><CR>!2T