Brother DCP-T310, User Manual

Page: 406 / 579

Error Message Cause Action
to replace these items and the time period
before replacement is dependent on the
number of purges and flushes required to
clean the ink system. These boxes
acquire amounts of ink during the different
purging and flushing operations. The
number of times a machine purges and
flushes for cleaning varies depending on
different situations. For example,
frequently powering the machine on and
off will cause numerous cleaning cycles
since the machine automatically cleans
upon power up. The use of non-Brother
ink may cause frequent cleanings
because non-Brother ink could cause
poor print quality which is resolved by
cleaning. The more cleaning the machine
requires, the faster these boxes will fill up.
Repairs resulting from the use of non-
Brother supplies may not be covered
under the stated product warranty.
Ink Low The amount of remaining ink in one or
more of the ink tanks is low.
This error message may appear if the ink
dot counter is incorrect even if some ink
remains. Look through the window of the ink tank to
confirm the actual amount of remaining
ink.
If the remaining ink level is at or below the
lower line under the minimum fill mark,
refill the ink tank.
A message may appear on the LCD to
verify whether the ink tanks were refilled.
Press
c
(
Yes
) to reset the ink dot counter
for the refilled colour. Press
d
(
No
) for the
non-refilled colours.
See
Related Information : Refill the Ink
Tanks .
Jam A Inside/Front
Repeat Jam A The paper is jammed in the machine. Remove the jammed paper.
See
Related Information : Paper is
Jammed Inside and in the Front of the
Machine (Jam A Inside/Front)
.
Make sure the paper length guide is set to
the correct paper size.
DO NOT extend the paper tray when you
load A5 or smaller size paper. (for some
countries)
Jam B Front
Repeat Jam B Front The paper is jammed in the machine. Remove the jammed paper.
See
Related Information : Paper is
Jammed in the Front of the Machine (Jam
B Front)
.
Make sure the paper length guide is set to
the correct paper size.
DO NOT extend the paper tray when you
load A5 or smaller size paper. (for some
countries)
Jam C Rear The paper is jammed in the machine. Remove the jammed paper.
See
Related Information : Paper is
Jammed in the Back of the Machine (Jam
C Rear)
.
Make sure the paper guides are set to the
correct paper size.
400