Brother DCP-T220 User Manual Download Page 98

Page: 98 / 237

Home >

Scan

Scan from Your Computer (Mac)

> Scan Using Apple Image Capture (ICA Driver)

Scan Using Apple Image Capture (ICA Driver)

The Apple Image Capture application uses the ICA scanner driver.

To use the ICA scanner driver, go to your model's

Downloads

page at

support.brother.com

and download

Scanner Driver (ICA)

1. Launch the

Image Capture

application.

2. Select your Brother machine from the

DEVICES

list on the left side of the screen.

(DCP-T420W/DCP-T425W)
If you connected your Brother machine to your computer with a USB cable, you will see the machine in the

DEVICES

area. If connected via network, you will see it in the

SHARED

area.

3. Load your document.
4. If you want to change the scan settings, click the

Show Details

button, and then configure the settings.

5. Select the destination folder or destination application from the

Scan To

pop-up menu.

6. Click

Scan

The machine starts scanning.

You can crop the image manually by dragging the mouse pointer over the portion you want to scan.

Related Information

•

Scan from Your Computer (Mac)

Summary of Contents for DCP-T220













































































































































































































































Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands

Brother DCP-T220, User Manual

Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands