manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 202

 Home > 

Routine Maintenance

 > 

Clean Your Brother Machine

 > Clean the Paper Feed Rollers

Clean the Paper Feed Rollers

If the paper feed rollers are stained with ink or have a buildup of paper dust, it may cause paper feed problems.

  WARNING

Be sure to unplug the machine from the electrical socket before cleaning the paper feed rollers to avoid

an electrical shock.

1. Unplug the machine from the electrical socket.
2. If the paper support flap is open, close it, and then close the paper support.
3. Pull the paper tray (1) completely out of the machine.

1

4. Clean the front and back sides of the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water,

using a side-to-side motion. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all
moisture.

1

5. Slowly push the paper tray completely into the machine.
6. Reconnect the power cord.

Do not use the machine again until the rollers are dry. Using the machine before the rollers are dry may
cause paper feed problems.

  Related Information

•

Clean Your Brother Machine

Related Topics:

•

Paper Handling and Printing Problems

 

198

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands