manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 21

Always make sure the paper is not curled or wrinkled.

6. Gently load paper in the paper tray with the printing surface 

face down

.

Make sure the paper is flat in the tray and the paper length guide (1) touches the edges of the paper.

1

IMPORTANT

•

Be careful not to push the paper in too far; it may lift at the back of the tray and cause paper feed
problems.

•

Loading more than 20 sheets of Photo 2L (13 x 18 cm) paper may cause paper jams.

To add paper before the tray is empty, remove the paper from the tray and combine it with the paper you
are adding. Always fan the stack of paper well to prevent the machine from feeding multiple pages.

7. Gently adjust the paper width guides (1) to fit the paper.

Make sure the paper width guides touch the edges of the paper.

1

8. Close the output paper tray cover.

17

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands