Brother DCP-T220 User Manual Download Page 94

Page: 94 / 237

Home >

Scan

Scan from Your Computer (Windows)

> Scan Using Windows Fax and Scan

Scan Using Windows Fax and Scan

Windows Fax and Scan application is another option that you can use for scanning.

•

Windows Fax and Scan uses the WIA scanner driver.

1. Load your document.
2. Launch Windows Fax and Scan.
3. Click

File

New

Scan

4. Select the scanner you want to use.
5. Click

The

New Scan

dialog box appears.

6. Adjust the settings in the dialog box, if needed.

The scanner resolution can be set to a maximum of 1200 dpi. If you want to scan at higher resolutions, use
the

Scanner Utility

software from

Brother Utilities

7. Click

Scan

The machine starts scanning the document.

Related Information

•

Scan from Your Computer (Windows)

•

WIA Driver Settings (Windows)

Summary of Contents for DCP-T220













































































































































































































































Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands

Brother DCP-T220, User Manual

Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands