manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 20

 Home > 

Paper Handling

 > 

Load Paper

 > 

 Load Paper in the Paper Tray

 > Load Cut-Sheet Paper or Photo

2L Paper in the Paper Tray

Load Cut-Sheet Paper or Photo 2L Paper in the Paper Tray

•

Load only one size and type of paper in the paper tray at a time.

•

When you load a different paper size in the tray, you must change the paper size setting on your computer.

1. If the paper support flap (1) is open, close it, and then close the paper support (2).

2

1

2. Pull the paper tray completely out of the machine.

3. Lift the output paper tray cover (1).

1

4. Gently press and slide the paper width guides (1) and then the paper length guide (2) to fit the paper size.

1

2

5. Fan the stack of paper well to avoid paper jams and misfeeds.

16

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands