manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 235

 Home > 

Appendix

 > Supply Specifications

Supply Specifications

Ink

The machine uses individual Black, Yellow, Cyan and Magenta ink bottles that are separate from the
print head assembly.

Service Life
of Ink Bottle

The first time you fill the ink tank the machine will use an amount of ink to fill the ink delivery tubes for
high quality printouts. This process will only happen once. After this process is complete the ink bottles
provided with your machine will have a lower yield than standard ink bottles (approximately 86% for
Black and 94% for colour). With all following ink bottles you can print the specified number of pages.

Replacement Supplies

Black Ink Bottle

BTD60BK

Yellow Ink Bottle

BT5000Y

Cyan Ink Bottle

BT5000C

Magenta Ink Bottle

BT5000M

Black - Approximately 7500 pages

 1

 

Yellow, Cyan and Magenta - Approximately 5000 pages

 1

  Related Information

•

Appendix

 

1

Quoted approx. yields are extrapolated based on Brother original methodology using Test Patterns ISO/IEC 24712.
Quoted approx. yields are not based on ISO/IEC 24711.

231

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands