Brother DCP-J785DW, User Manual

Page: 572 / 582

communicates with other networks, you may need to configure the Gateway IP address. If you do not know the
Gateway IP address, then contact your Network Administrator.
Grey Scale
The shades of grey available for copying and faxing photographs.
Group Number
A combination of Address Book numbers that are stored in Address Book for Broadcasting.
IEEE 802.11b/g/n
Wireless LAN standards that were established by IEEE (Institute of Electrical and Electronics Engineers).
IEEE802.11n standards are backward compatible with IEEE802.11g and IEEE802.11b standards. The
transmission speeds are 11 Mbit/sec or lower for IEEE802.11b, 54 Mbit/sec or lower for IEEE802.11g, and 100
Mbit/sec or higher for IEEE802.11n. The wireless LAN features of this product comply with the IEEE802.11b,
IEEE802.11g, and IEEE802.11n standards.
Infrastructure Mode
The mode of operation in a wireless network, in which all devices (machines and computers) are connected via
an access point/router.
Innobella
Innobella is a range of genuine supplies offered by Brother. For best quality results, Brother recommends
Innobella ink and paper.
IP Address
An Internet Protocol (IP) address is a series of numbers that identifies each device connected to a network. An
IP address consists of four numbers separated by dots. Each number is between 0 and 255.
Example: In a small network, you would normally change the final number.
192.168.1.1
192.168.1.2
192.168.1.3
How the IP address is assigned to your print server:
If you have a DHCP/BOOTP/RARP server in your network, the print server will automatically obtain its IP
address from that server.
On smaller networks, the DHCP server may also be the Router.
If you do not have a DHCP/BOOTP/RARP server, the Automatic Private IP Addressing (APIPA) protocol will
automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.
Home > Glossary
566