Brother BAS H series, Instruction Manual

Page: 82 / 141

CHAPTER 3 PROGRAMMING PATTERNS
74
BAS H series, Programmer
Inserting a straight line into a pattern
This describes how to add a new pattern to an existing program or pattern which has already been created.
* The procedure introduced here is the procedure when "Settings" -> "Programmer" -> "Consecutive Data Input" is set
to "OFF".
1
）
When inserting a straight line before the selected pattern
[Before inserting straight line]
[After inserting straight line]
1. Touch .
2. Use to move the cursor to outline #2.
3. Touch .
4. Touch .
5. Touch to select "Insert".
6. Use the jog key to move the cursor to the position
where you would like to insert the pattern.
7. Press to provisionally set the start point.
8. Use the jog key to move the cursor to the
position for the end point of the new pattern to be
created.
9. Press to provisionally set the sewing points.
* Repeat steps 8 and 9 until the shape of the pattern
has been created.
10. Press to confirm the pattern.
#2 →