Brother BAS H series, Instruction Manual

Page: 32 / 141

CHAPTER 3 PROGRAMMING PATTERNS
24
BAS H series, Programmer
Creating a circle
The following three options are available for creating a circle.
Specify a radius to create a circle (clockwise or counterclockwise)
Specify a diameter to create a circle (clockwise or counterclockwise)
1. Touch .
■
If
is selected
2. Touch or .
3. Make the settings for each item.
* Refer to "Setting parameters" (page 27) for details
on the setting method.
4. Use the jog key to move the cursor to the second
point, and then press .
■
If
is selected
2. Touch .
3. Make the settings for each item.
* Refer to "Setting parameters" (page 27) for details
on the setting method.
4. Use the jog key to move the cursor
to the second
point, and then press .
5. Use the jog key to move the cursor to the third
point, and then press .