Brother BAS H series, Instruction Manual

Page: 107 / 141

CHAPTER 4 EXTENDED OPTION OUTPUT (PROGRAM)
BAS H series, Programmer
99
Examples of option outputs (Application)
 Automating the commencement of sewing
If you set memory switch No. 950 to ON, sewing automatically commences after turning on option output No. 1.
Create a program to make the machine commence sewing after the work clamp lowers.
1. Change the memory switches to the following settings.
No.50
＝
4, No.57
＝
ON, No.950
＝
ON
2. Have the programmer at hand and display the output settings.
If any extended option output exists which has already been registered, delete it first.
3. Referring to the "Standard output" table of condition numbers (refer to page 85), set the output condition for No. 1
to "on when condition No. 31 (after the work clamp lowers) is established", and set Timer 2 to 100 ms. Enter the
following in the extended option output settings.
4. Touch to write the extended option output.
5. Display the extended option output settings once more.
Touch to apply the extended option output which was written in step 4 to the sewing machine.
6. Read the sewing data. Depress the start pedal. The sewing machine detects the home position and moves to the
sewing start point. Though depressing the start pedal usually starts sewing operation, it will not when memory
switch No. 950 is set to ON. Depress the foot pedal twice to raise and lower the work clamp. Confirm that sewing
commences after the foot pedal has reached the lowered position.