Brother BAS H series, Instruction Manual

Page: 35 / 141

CHAPTER 3 PROGRAMMING PATTERNS
BAS H series, Programmer
27
◆
Setting parameters
■
Operation method
Parameters are displayed in a list at the right edge of the screen, so touch to make the settings.
■
Details of parameter settings
Icon Parameter Choices
Method for Appending *1 Insert, Append to beginning, Append to end
Method for moving cursor Move freely, Snap to needle point
Rotation direction *2 Clockwise, Counterclockwise
Line type Running, V Zigzag, N Zigzag
Running pitch *3 0.3 - 12.7 mm
0.3 – 20.0 mm (BAS-360H, BAS-365H,
BAS-370H, BAS-375H)
Zigzag pitch *4 0.1 - 25.5 mm
Zigzag left width *4 0.0 - 25.5 mm
Zigzag right width *4
Number of zigzag stitches *4 2 - 4 stitches
Running generation mode *3 Equal Pitch, Prioritize Pitch
Backtack entry mode No Back Tack, V Back, N Back, Overlap *6
Backtack exit mode
Backtack Entry Number of
Stitches *5 0 - 9 stitches
Backtack Exit Number of Stitches
*5
Maximum Pitch *7 0.3 - 12.7 mm
0.3 – 20.0 mm (BAS-360H, BAS-365H,
BAS-370H, BAS-375H)
Split Auto Insert *8 None, Split w/Needle Up
Outline connection Feed, Running, Stitch, Baste
*1 When adding an existing pattern, you can select the method for appending the program (Insert, Append to end, Append to
beginning).
*2 This can only be set when drawing a circle (radius), circle (diameter), semicircle or ellipse.
*3 This can only be set when the line type is set to "Running".