CHAPTER 4 EXTENDED OPTION OUTPUT (PROGRAM)
102
BAS H series, Programmer
4. Referring to the "External input of the extended option" table of condition numbers (refer to page 86), set the output
off condition for No. 2 to "off when condition No. 41 (input 1 off) is established". Enter into the setting screen as
follows.
5. Referring to the "External input of the extended option" table of condition numbers (refer to page 86), set the
enabling condition for No. 2 to "Enable
setting when condition No. 42 (input 2 on) is established". Set
"Disable
when condition No. 43 (input 2 off) is established".
6.
Touch
to overwrite the extended option output.
7.
Display the extended option output once more, and then touch
to apply the extended option output which
was overwritten in step 6 to the sewing machine.
8. Confirm that sewing commences as the work clamp lowers when both option inputs No. 1 and 2 are ON.
In the example above, the output condition for virtual output No. 2 on is condition No. 40 (input 1 on).
If input 1 is already on when the power is turned on, virtual output No. 2 will not turn on.
Summary of Contents for BAS H series
