Brother ADS-1100W Service Manual Download Page 37

Page: 37 / 119

2-14

Confidential

4.1.7 Overcurrent has been detected in the device connected to the USB terminal.

The USB device connected to the USB terminal is not supported.

An USB hub is connected to the USB terminal.

4.1.8 The front cover sensor detected an open front cover.

4.1.9 Separation pad counter has exceeded the upper limit.

Pick-up roller counter has exceeded the upper limit.

Both of separation pad counter and pick-up roller counter have exceeded the

upper limit.

4.1.10 The top cover was opened when a card was set.

<User Check>

• Disconnect the device or USB hub connected to the USB terminal.

Step

Cause

Remedy

Main PCB failure

Replace the main PCB ASSY.

<User Check>

• Close the front cover correctly.

Step

Cause

Remedy

Front cover actuator coming off Reattach the front cover actuator.

Front cover sensor coming off

Reattach the front cover sensor.

Connection failure of the front
cover sensor harness

Reconnect the front cover sensor harness.

Front cover sensor failure

Replace the cover switch ASSY.

Panel PCB failure

Replace the panel unit.

Main PCB failure

Replace the main PCB ASSY.

<User Check>

• Replace the separation pad ASSY and reset the separation pad counter.
• Replace the pick-up roller and reset the pick-up roller counter.

Step

Cause

Remedy

Main PCB failure

Replace the main PCB ASSY.

<User Check>

• Close the top cover correctly.

Step

Cause

Remedy

Card detection actuator caught
in sections of the machine

Reattach the card detection actuator.

Card detection sensor failure

Replace the card detection sensor PCB ASSY.

Main PCB failure

Replace the main PCB ASSY.

Summary of Contents for ADS-1100W
























































































































Search results

Summary of Contents for ADS-1100W

Reviews:

Related manuals for ADS-1100W

Brands by name

Popular brands

Brother ADS-1100W, Service Manual

Search results

Summary of Contents for ADS-1100W

Reviews:

Related manuals for ADS-1100W

Brands by name

Popular brands