Brother ADS-1100W Service Manual Download Page 46

Page: 46 / 119

2-23

Confidential

4.3.5 Document is not picked up and fed

4.3.6 Card is not picked up and fed

<User Check>

• Check that the paper used for the document is not thinner than the standard. Use the test

chart sheets.

• Check that the front cover is closed correctly.
• Check that the document guide is adjusted well and the document is seated properly.

Step

Cause

Remedy

Document detection actuator
coming off

Reattach the document detection actuator.

Connection failure of the document
detection sensor harness

Reconnect the document detection sensor
harness.

Connection failure of the top cover
sensor harness

Reconnect the top cover sensor harness.

Connection failure of the main
motor harness ASSY

Reconnect the main motor harness ASSY.

Attachment failure of the gears in
the feeding system

Reattach the gears in the feeding system.

Top cover sensor or front cover
sensor failure

Replace the cover switch ASSY.

Document detection sensor failure Replace the document detection sensor

PCB.

Main motor failure

Replace the main motor.

Main PCB failure

Replace the main PCB ASSY.

<User Check>

• Check that the card is set correctly.
• Check that the card guide is adjusted well and the card is not stuck.

Step

Cause

Remedy

Card detection actuator caught in
sections of the machine

Reattach the card detection actuator.

Connection failure of the card
detection sensor harness

Reconnect the card detection sensor
harness.

Connection failure of the main
motor harness ASSY

Reconnect the main motor harness ASSY.

Attachment failure of the gears in
the feeding system

Reattach the gears in the feeding system.

Front cover sensor or top cover
sensor failure

Replace the cover switch ASSY.

Card detection sensor failure

Replace the card detection sensor PCB.

Main motor failure

Replace the main motor.

Main PCB failure

Replace the main PCB ASSY.

Summary of Contents for ADS-1100W
























































































































Search results

Summary of Contents for ADS-1100W

Reviews:

Related manuals for ADS-1100W

Brands by name

Popular brands

Brother ADS-1100W, Service Manual

Search results

Summary of Contents for ADS-1100W

Reviews:

Related manuals for ADS-1100W

Brands by name

Popular brands