manualshive.com logo in svg

Brother ADS-1100W, Service Manual, Page: 92 / 119

Share
Download
Brother ADS-1100W Service Manual Download Page 92

4-5

Confidential

1.6

Restoring the Machine Information

This function is used to restore information including machine information and user settings 
backed up in USB flash memory drive before disassembly. 

If you succeeded in restoring, procedure 1.5 to 1.7 are not required.

(1) Press and hold the 

 key for five seconds or longer when the machine is in the ready 

state. LEDs except WiFi LED light.

(2) Press the [to USB], [to Network Device2], and [to Network Device1] keys in this order. The 

to USB, Error, 

, and 

 LEDs light and the machine enters the maintenance mode.

(3) Connect the USB flash memory drive with back up data to the machine.

(4) Press the [to Network Device2] key eight times. The to PC LED lights.

(5) Press the 

 key. The to PC, to USB, to Network Device1, and 

 LEDs light.

(6) Press the [to Network Device1] key. The machine information is stored in EEPRPOM of the 

machine, then the to PC, to USB, to Network Device1, and 

 LEDs light.

(7) Press the 

 key, and the machine returns to the initial state of maintenance mode. 

Disconnect the USB flash memory drive.

(8) Press the [to Network Device1] key, and then [to Network Device2] key three times. The to 

PC, to USB, and to Network Device2 LEDs light.

(9) Press the 

 key. The machine returns to the ready state.

Note:

• Do not disconnect the USB flash memory drive until 

 LED light. The machine 

may write faulty data when the USB flash memory drive is disconnected during the 
process.

Note:

• When the machine information is successfully restored, perform (8) and (9) to quit 

the maintenance mode, and restart the machine. If you don't restart the machine, 
we cannot ensure its normal operation.

Summary of Contents for ADS-1100W
























































































































Reviews:

No comments