Brother ADS-1100W Service Manual Download Page 90

Page: 90 / 119

4-3

Confidential

1.2

Setting by Country

(1) Press and hold the

key for five seconds or longer when the machine is in the ready

state. LEDs except WiFi LED light.

(2) Press the [to USB], [to Network Device2], and [to Network Device1] keys in this order. The

to USB, Error,

, and

LEDs light and the machine enters the maintenance mode.

(3) Connect the computer to the machine with the USB cable.

(4) Turn ON the computer.

(5) Open the temporary folder and double-click "Filedg32.exe" to start it, and select the

"Brother Maintenance USB Printer".

(6) Drag and drop the Country code setting PJL file in the temporary folder onto the "Brother

Maintenance USB Printer" icon. The country code information is loaded to the machine and
written to the flash ROM.

(7) Wait for several seconds, and the country code that has been set is displayed on the

computer screen.

(8) Unplug the AC adapter of the machine, and disconnect the USB cable.

1.3

CIS Type Setting

(1) Press and hold the

key for five seconds or longer when the machine is in the ready

state. LEDs except WiFi LED light.

(2) Press the [to USB], [to Network Device2], and [to Network Device1] keys in this order. The

to USB, Error,

, and

LEDs light and the machine enters the maintenance mode.

(3) Connect the computer to the machine with the USB cable.

(4) Turn ON the computer.

(5) Open the temporary folder and double-click "Filedg32.exe" to start it, and select the

"Brother Maintenance USB Printer".

(6) Drag and drop the "CDSM59-1-3-1_FS.pjl" file in the temporary folder onto the "Brother

maintenance USB Printer" icon. CIS type setting is completed. If the firmware is not the D
version or later, after drag and drop, the CIS type is not be completed with a beep.

Summary of Contents for ADS-1100W
























































































































Search results

Summary of Contents for ADS-1100W

Reviews:

Related manuals for ADS-1100W

Brands by name

Popular brands

Brother ADS-1100W, Service Manual

Search results

Summary of Contents for ADS-1100W

Reviews:

Related manuals for ADS-1100W

Brands by name

Popular brands