Brother 882-C50 Operational Manual Download

Page: 39 / 312

LCD SCREEN

ettin
g R

Basic operations

B-37

Read the explanations and select the
appropriate stitch.

→

The screen displays directions for sewing the
selected stitch. Follow the directions to sew the
stitch.

Press

to view the next page.

Press

to view the previous page.

Using the Pattern Explanation
Function

If you want to know more about the uses of a stitch
pattern, select the pattern and press

and

then

to see an explanation of the

stitch selection.

Example:

Displaying information about

Press .

→

The screen shows information.

Press

to return to the original screen.

Note

• With the pattern explanation function,

descriptions can be displayed for the
patterns available on the Utility Stitch and
Character/Decorative Stitch screens.

• Descriptions are displayed for each pattern

in the Utility Stitch screen. Description for
the Character/Decorative Stitch category is
also displayed.

• If the

key appears in gray, the

pattern explanation function cannot be
used.

Memo

• The settings remain displayed to allow you

to fine tune the stitch.

Summary of Contents for 882-C50

























































































































































































































































































































Search results

Summary of Contents for 882-C50

Reviews:

Related manuals for 882-C50

Brands by name

Popular brands

Brother 882-C50, Operational Manual

Search results

Summary of Contents for 882-C50

Reviews:

Related manuals for 882-C50

Brands by name

Popular brands