MERCURY ULTRA D.C.
19” and 21”
Ultra High Speed Burnisher
1170, 1500, and 2000 RPM - 1.5 HP
SPECIFICATIONS
Machine Speed
1170 RPM
1500 RPM
2000 RPM
19” Model No.
DC-19-1170
DC-19-1500
DC-19-2000
Weight
84 lbs.
84 lbs.
86 lbs.
21” Model No.
DC-21-1170
DC-21-1500
DC-21-2000
Weight
87 lbs.
87 lbs.
89 lbs.
Motor Type
1.5 HP D/C rectified
Amp Draw
13-15 amps
Chassis
Polished aluminum
Power Cord
50 foot safety yellow 14/3 Ga.
Wheels
6 inch non-marking operating
4 inch transport
Warranty
5 years motor
All metal chassis /
added weight for
a longer lasting,
brighter shine
Balanced chassis design / provides
more precise pad pressure
Low profile drive apron /
easily reaches under
counter coves and beds
1.5 HP, D/C rectified motor /
eliminates brown-outs,
low voltage and startup
torque problems
Flexible pad
holder with
threaded pad-
centering device / conforms to floor
irregularities, delivering an even
shine and gloss
Safety enhanced non-
conductive dual
triggers / eliminates
shock potential
Safety enhanced
interlock switch /
both hands are
conveniently in control
Fully adjustable handle position /
comfortable for all operators
Motor plugs in at handle base
Separate non-marking transport
wheels / prevents tracking in
contaminants
Non-marring full wrap bumpers /
protects walls and baseboards
2000 RPM model
has adjustable
pressure front
wheel assembly
(not pictured) /
consistent results
even with
novice operators
7C29 listed /
reliable quality
Superior
balance
for
precise
control
U
L
110 South Van Brunt Street
Englewood, NJ 07631
Phone (201) 568-4606
Toll Free (888) 568-4606
FAX (201) 568-7962
www.mercuryfloormachines.com
ISSA
The Experts
on Cleaning and Maintenance
®
MEMBER
MEMBER
SINCE 1958
©2008 Mercury Floor Machines, Inc.
Mercury Floor Machines, Inc
New Equipment Warranty
Limited Warranty
Mercury Floor Machines, Inc. warrants new equipment against defects in material and
workmanship under normal use and service to the original purchaser. Any statutory implied
warranties, including any warranty of merchantability or fitness for a particular purpose, are
expressly limited to the duration of this written warranty. Mercury Floor Machines, Inc. will not be
liable for any other damages, including but not limited to indirect or special consequential damages
arising out of or in connection with the furnishing, performance, use or inability to use the machine.
This remedy shall be the exclusive remedy of the purchaser. The warranty period is subject to the
conditions stated below.
5 Years - Motor and Gearbox. 1 Year- Service Labor
Mercury Floor Machines Inc. warrants electric motors and transmission gearboxes on all Mercury
floor machines to be free from defects in material and workmanship, under normal use and service
for five (5) years to the original purchaser. Parts replaced or repaired under this warranty are
warrantied for the remainder of the original warranty period. Service labor charges are covered for
one (1) year from the date of purchase, when performed by a Mercury authorized-service provider.
Freight charges to and from this service providers will be covered for 90 days from the purchase
date. After this 90 day period, these freight charges will be paid by the equipment owner. Travel
expenses are not covered.
Wear Items on All Machines
Critical Wear Items
- bearings, capacitors, clutches, pulleys, rectifiers, relays, switches, wheels,
tires and casters are warranted for manufacturing defects for one (1) year from the purchase date.
Normal Wear Items -
belts, brushes, bumpers, carbon brushes, cords, finishes, squeegees,
actuating cables, and gaskets are warranted for manufacturing defects for ninety (90) days from
the purchase date.
All warrantees of motors and associated components will be voided; if the machine is used as a
floor sander; if the machine is serviced by anyone other than a Mercury-authorized service
provider; if the machine is mechanically modified; or if the machine is misused or abused.
The warranty starts on the purchase date by the original purchaser from an authorized Mercury
Floor Machines, Inc. distributor, subject to proof of purchase. The Machine Registration Card must
be completed and returned immediately at the time of purchase. If proof of purchase cannot be
identified, the warranty start date is 90 days after the date of sale to an authorized Mercury Floor
Machines, Inc. Distributor.
