Brother 882-C50 Operational Manual Download Page 207

Page: 207 / 312

SEWING AN EMBROIDERY PATTERN

Em
br

oide

Embroidering

E-25

Press the “Start/Stop” button.

→

The appliqué will then be completed.

Change the upper thread and then carry out
the rest of the embroidering.

Memo

• Some patterns may not show all three

appliqué steps. Sometimes the
“APPLIQUE” step will be shown as a color.

Memo

• Some glue may get onto the presser foot,

needle, and needle plate at this time. Finish
embroidering the appliqué pattern and then
clean away the glue.

• For best sewing results clip all threads

between color steps.

Summary of Contents for 882-C50

























































































































































































































































































































Search results

Summary of Contents for 882-C50

Reviews:

Related manuals for 882-C50

Brands by name

Popular brands

Brother 882-C50, Operational Manual

Search results

Summary of Contents for 882-C50

Reviews:

Related manuals for 882-C50

Brands by name

Popular brands