Brother 882-C50 Operational Manual Download

Page: 168 / 312

USING THE MEMORY FUNCTION

S-98

Press .

Press

to return to the original screen without

saving.

→

The stitch pattern will be temporarily saved to
“Removable Disk” under “Computer (My
computer)”.

Select the stitch pattern’s .pmv file and
copy the file to the computer.

Retrieving Stitch Patterns from
the Machine’s Memory

Press .

→

The pocket selection screen appears.

Choose a stitch pattern to retrieve.

If the entire saved stitch pattern is not displayed,
press the thumbnail.

Press

to return to the original screen without

saving.

Saved stitch patterns

Press .

Press

to delete the stitch pattern.

→

The selected stitch pattern is retrieved and the
sewing screen will be displayed.

Note

• Do not turn off the machine while the

“Saving” screen is showing. You may lose
the data.

Summary of Contents for 882-C50

























































































































































































































































































































Search results

Summary of Contents for 882-C50

Reviews:

Related manuals for 882-C50

Brands by name

Popular brands

Brother 882-C50, Operational Manual

Search results

Summary of Contents for 882-C50

Reviews:

Related manuals for 882-C50

Brands by name

Popular brands