Brother 882-C40 Operational Manual Download Page 270

Page: 270 / 332

EDITING PATTERNS

E-70

Repeat the previous steps until all desired
thread colors are specified.

To delete a specified color from the palette, select

the color to be deleted, and then press

To delete all the specified color from the palette,

press .

Press

to return to the original screen.

■

Saving the Custom Thread Table to
USB media

You can save a custom thread table data file to USB
media.

Press

and then press

Set your desired colors in the custom thread
table according to the procedure in
“Creating a Custom Thread Table” on
page E-68.

Insert the USB media into the USB port on
the machine.

USB port

USB media

Press .

→

The “Saving” screen is displayed. When the data is
saved, the display returns to the original screen
automatically.

■

Recalling the Custom Thread Table
data from USB media

You can recall a custom thread table data from USB
media.

Note

• Custom thread table data can only be saved

to USB media. You cannot save the data in
the machine’s memory or in the computer.

• Custom thread table data is saved as “.pcp”

data file.

Note

• Two USB media cannot be used with this

machine at the same time. If two USB
media are inserted, only the USB media
inserted first is detected.

Note

• Do not insert or remove USB media while

“Saving” screen is displayed. You will lose
some or all of the data you are saving.

Note

• Do not store two or more “.pcp” data file in

USB media. You can only recall one custom
thread table data at a time.

Summary of Contents for 882-C40













































































































































































































































































































































Search results

Summary of Contents for 882-C40

Reviews:

Related manuals for 882-C40

Brands by name

Popular brands

Brother 882-C40, Operational Manual

Search results

Summary of Contents for 882-C40

Reviews:

Related manuals for 882-C40

Brands by name

Popular brands