Brother 882-C40, Operational Manual

Page: 175 / 332

EDITING STITCH PATTERNS
Cha
ra
cte
r/D
ec
o
ra
ti
ve
S
titc
he
s
Sewing S-87
S
3
Changing Thread Density
(for Satin Stitch Patterns Only)
After selecting a satin stitch pattern, press to
select your preferred thread density.
Returning to the Beginning of the
Pattern
When sewing character/decorative stitches, you
can return to the beginning of the pattern after trial
sewing or when the stitching is sewn incorrectly.
a
Press the “Start/Stop” button to stop the
machine, and then press .
→
Sewing returns to the beginning of the selected
pattern (“W”) from the point where sewing was
stopped.
b
Press the “Start/Stop” button to continue
sewing.
Memo
• To finish a complete motif while sewing the
pattern continuously, you can press the
key while sewing. The machine will
automatically stop when the motif is
finished.
CAUTION
• If the stitches bunch when thread density is
changed to , return the thread density to
. If you continue sewing when the stitches
are bunched, the needle may bend or break.
Memo
• Even if you select a new pattern after
changing the thread density, the thread
density remains the same until you change
it.
• You cannot change thread density for a
combined pattern after additional patterns
are added.
Memo
• If this key is pressed when sewing is
stopped, patterns can be added at the end
of a combined stitch pattern. (In this
example, “!” is added.)