Brother 882-C40 Operational Manual Download Page 237

Page: 237 / 332

REVISING THE PATTERN

Em
br

oide

Embroidering

E-37

Mark the embroidery start position on the
fabric, as shown.

Press .

Start position

This key is used for aligning linked characters (see
page E-41).

→

The needle position moves to the bottom left corner
of the pattern (the embroidery frame moves so that
the needle is positioned correctly).

Press .

Use

to align the needle and the mark

on the fabric, and begin embroidering the
pattern.

Changing the Size of the Pattern

Press .

Select the direction in which to change the
size.

Press

to enlarge the pattern proportionately.

Press

to shrink the pattern proportionately.

Press

to stretch the pattern horizontally.

Press

to compact the pattern horizontally.

Press

to stretch the pattern vertically.

Press

to compact the pattern vertically.

Press

to return the pattern to its original

appearance.

Summary of Contents for 882-C40













































































































































































































































































































































Search results

Summary of Contents for 882-C40

Reviews:

Related manuals for 882-C40

Brands by name

Popular brands

Brother 882-C40, Operational Manual

Search results

Summary of Contents for 882-C40

Reviews:

Related manuals for 882-C40

Brands by name

Popular brands