e-mail:
voice:
360.854.9559
fax:
866.783.1742
11
SS 16.16 Installation and Operation Manual
INSTALLATION
INSTALLATION GUIDELINES
Inspection:
Please examine your SS 16.16 carefully for any damage that may have been sus-
tained during shipping. If any is noted, please notify the shipper immediately and
retain the packaging for inspection by the shipper. The package contains the SS
16.16, Installation manual, reversed modular serial cable, 9-pin D-Sub (S 9) adapter
and IPS model HUP45-32 universal switching tri-voltage power supply.
Setting Operation “DIP” Switches:
The SS 16.16 is equipped with an 8-position “PGM” DIP Switch. The DIP Switch
specifies 3-bit unit ID, baud rate, power-up modes, remote control and other features
listed below. The dipswitch (SW1) is located on the rear panel.
WEBSITE:
Visit our web site for
product updates and
additional information
DIP (SW1) Switch Functions
SW1, Switch
Number
Default
Setting
Function
1
OFF
Add 1 to Address (base address is 0)
2
OFF
Add 2 to Address (base address is 0)
3
OFF
Add 4 to Address (base address is 0)
4
OFF
Baud Rate: 0 - 9600, 1 - 38400
5
OFF
OPEN
6
OFF
Open collector follow latch mode = OFF
Open collector follow Pulse mode = ON
NOTE: Refer to SW1-8
7
OFF
Power-up Channel configuration
Channel selection user programmable = OFF
Last source(s) selected = ON
8
OFF
Enables SW1-6 = OFF
Software controlled = ON
Address (ID) DIP Switches
SW1 – 1
SW1 – 2
SW1-3
ID
OFF
OFF
OFF
ID = 0
ON
OFF
OFF
ID = 1
OFF
ON
OFF
ID = 2
ON
ON
OFF
ID = 3
OFF
OFF
ON
ID = 4
ON
OFF
ON
ID = 5
OFF
ON
ON
ID = 6
ON
ON
ON
ID = 7
