e-mail:
voice:
360.854.9559
fax:
866.783.1742
17
SS 16.16 Installation and Operation Manual
INSTALLATION
Open Collector Output Control Commands:
*uOOrrL
- Latch open collector “rr”
*uOOrrF
- Unlatch open collector “rr”
*uOOrrP
- Pulse open collector “rr”
Audio Switch Control Commands:
*uiioo
- Apply input “ii” to output “oo”
*uiiA
- Apply input “ii” to ALL outputs
*uB,a,a,a,a,a,a,a,a,a,a,a,a,a,a,a,a - Set all outputs. The first a is output 1, second a
is output 2, etc. Each is hex 60 + input number 1 – 16 or F
for OFF.
Example:
Input 2 would be lower case b.
*uiiMA
- Mute input “ii” for all outputs
*uMoo
- Mute output “oo”
*uMA
- Mute all outputs
*uMRxx
- Recall macro 01 – 16
*uMSxx
- Store macro 01 – 16
Information Retrieval Commands:
*POLL
- Respond with unit (ID) address in appropriate time slot. If
there are multiple units on the line, each will respond with a
different delay after receipt of this command.
*uSL
- Send Audio Status:
SuLo,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx<CR
><LF>.
“u” is unit ID, xx is the output selection for each input.
Inputs are 01 to 16 (left to right).
Example:
“S0L1,16,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00<CR
><LF> indicates that unit 0, Input 01 is connected to output 16.
*uSO
- Send status of all open collectors -
SuO,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<CR><LF>
“x” is 0 = NOT Active, 1 = Active.
*uSPii
- Send status of programmable pulse stretcher input “ii”.
Response is “SuP,ii,x” where “x” is 0 if the corresponding
input is high, 1 otherwise.
*uSPA
- Send status of all programmable pulse stretcher inputs.
Response is “SuP,A,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x<CR><LF >
where input 0 is first and input 15 is last. “x” is 0 if the corre-
sponding input is high, 1 otherwise.
*uU
- Send Unit Information:<name(SS16.16)><version><cr><lf
*uY
- Display configuration
