Broadcast Tools SS 16.16 Installation And Operation Manual Download Page 4 | Manualshive

Page: 4 / 22

background image

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

4

SS 16.16 Installation and Operation Manual

INTRODUCTION

INTRODUCTION

Thank you for your purchase of a Broadcast Tools® SS 16.16 Sixteen Input,
Sixteen Output Stereo Audio Routing Switcher (referred to as the SS 16.16
throughout this manual). We’re confident that this product will give you many
years of dependable service. This manual is intended to give you all the infor-
mation needed to install and operate the Broadcast Tools® SS 16.16.

SAFETY INFORMATION

Only qualified personnel should install Broadcast Tools® products. Incorrect or
inappropriate use and/or installation could result in a hazardous condition.

WHO TO CONTACT FOR HELP

If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment.

If you would like more information about Broadcast Tools® products, you may
reach us at:

Broadcast Tools, Inc.

131 State Street
Sedro-Woolley, WA 98284 USA
Voice: 360.854.9559
Fax:

866.783.1742

Internet Home Page: www.broadcasttools.com
E-mail:

[email protected]

THANK YOU FOR CHOOSING

BROADCAST TOOLS® BRAND PRODUCTS!

CAUTION!

Broadcast Tools®

Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.

NOTE:

This manual should be
read thoroughly before
installation and operation.

WEBSITE:

Visit our web site for
product updates and
additional information

Broadcast Tools is a Veteran Owned Business

Designed, Assembled and Supported in WA State, USA

«
...
2
3
4
5
6
...
»

Summary of Contents for SS 16.16























Reviews:

No comments

Related manuals for SS 16.16

Brand: C&H Technologies Pages: 1

Brand: D-Box Pages: 31

Brand: IDEC Pages: 5

Brand: IDEC Pages: 7

Brand: Qlogic Pages: 4

Brand: Vector Pages: 6

Brand: Edge-Core Pages: 9

Sierra Video 1208V3S

Brand: Kramer Pages: 2

Brand: Electroswitch Pages: 6

Brand: N-Tron Pages: 17

Brand: Canoga Perkins Pages: 7

Brand: GarrettCom Pages: 77

Brand: Clas Ohlson Pages: 5

OpenGear DSS-8224

Brand: Ross Pages: 47

Brand: Lindy Pages: 12

S-Mix-Pro 18*18

Brand: Kensence Pages: 24

3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE...

Brand: 3Com Pages: 256

Brand: Omega Engineering Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands