Broadcast Tools SS 16.16 Installation And Operation Manual Download Page 5 | Manualshive

Page: 5 / 22

background image

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

5

SS 16.16 Installation and Operation Manual

DESCRIPTION

DESCRIPTION

The Broadcast Tools® SS 16.16 provides audio routing of 16 stereo inputs to 16
stereo outputs. This type of switching allows any one stereo input to be assigned to
any or all stereo outputs. The SS 16.16 may be controlled via front panel encoder
controls and/or multi-drop RS-232 serial port. A 40 x 4 LCD back lit display pro-
vides for input descriptions and macro setup. A 16 x 16 GPIO port is provided when
used with automation systems. FREE MS Windows “NetSwitch/II remote control
software is available for download. Two versions are provided, serial/USB and
Ethernet. Installation is simplified with removable screw terminals (Euro).

PRODUCT FEATURES

• Stereo routing of any one input to any or all outputs.
• Headphone amplifier with front panel 1/4” jack and level control.
• Front panel monitor speaker with mute switch and level control.
• 40 x 4 LED back lit LCD display with user programmable nine character

input descriptions.

• Internal audio activity/silence sensor monitors output channel sixteen. A front

panel “ACT” indicator and rear panel open collector are provided. Trigger
set at -30dbu.

• Two front panel encoder controls are provided. One each for input / output

channel selection.

• Power-up selection of channel configuration, mute or last source selected.
• Sixteen user configured macros.
• Most configuration options may be set via the easy access rear panel dip-

switches.

• 16 input GPI port (PIP) with LED indicator.
• 16 open collector channel status outputs or programmable via burst com-

mands.

• Multi-turn input level controls and single turn output level controls.
• Electronically balanced stereo inputs and outputs.
• Multi-drop RS-232 serial port with data activity LED.
• Multiple unit inputs may be cascaded to expand outputs.
• Depluggable screw (EURO) terminals for ALL connections.
• Logic functions via microprocessor with non-volatile memory.
• External tri-voltage universal switching power supply.
• 2-RU chassis.

«
...
3
4
5
6
7
...
»

Summary of Contents for SS 16.16























Reviews:

No comments

Related manuals for SS 16.16

LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES

Brand: Jabra Pages: 4

Brand: Eaton Pages: 2

RMQ-Titan M30 Series

Brand: Eaton Pages: 4

Brand: Aruba Pages: 6

SwitchMan USB-Combo SW2

Brand: Raritan Pages: 2

Brand: Minicom Pages: 16

Brand: Pilz Pages: 20

Brand: Guntermann & Drunck Pages: 20

Brand: Edimax Pages: 2

Brand: Kramer Pages: 10

Brand: H3C Pages: 19

Brand: Alloy Pages: 64

Brand: H-Tronic Pages: 20

Director xStream Pro

Brand: Net Optics Pages: 2

Brand: LevelOne Pages: 4

Matrix 50 Series

Brand: Extron electronics Pages: 74

grass valley MASTERPIECE 12G-SDI

Brand: Belden Pages: 49

Brand: MICROTRONIX Pages: 87

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands