e-mail:
voice:
360.854.9559
fax:
866.783.1742
19
SS 16.16 Installation and Operation Manual
SPECIFICATIONS
SPECIFICATIONS
Input Levels:
Max + 27 dBu, balanced, bridging. > 20k
Ω
.
Output Levels:
Stereo balanced outputs +24 dBm. @ 600
Ω
. / +27dbu @ 10K
Ω
Gain:
3dB
Frequency Response: * 20 to 20 kHz; +/- .0.25dB
Signal/Noise Ratio: * >90 dB nominal, weighted 20 to 22Khz, @ +24 dBm.
Distortion: *
Less than 0.005% THD @ +24 dBu.
IMD (250/7kHz): *
Less than 0.017% IMD @ +24 dBu.
Crosstalk: *
>-80 dB @ 1khz / -55 dB @ 10 kHz from adjacent channel.
Switching Method:
Digitally controlled CMOS professional level analog switch
arrays.
Logic:
Microprocessor with non-volatile memory.
Operation Control:
Front Panel - Momentary switches and rotary encoders
PIP –16 - Momentary closures to ground. >50ms. (5 volt
though 20 k pull-up)
RS-232 - Multi-drop Serial 9600 or 38.400 K baud, 8N1.
Status/Control:
Front Panel –40 x 4 LED back lit LCD display and LED indicators.
Remote - 16 - Open collector outputs. (5 volt @ 100ma per output)
RS-232 - Multi-drop Serial 9600 or 38.400 baud, 8N1.
Interfacing:
Audio & Remote Control - Rear panel depluggable screw ter-
minals.
Accommodates 16 - 28 AWG wire. Mating connectors supplied.
RS-232 Serial - RJ-11/6P4C Modular, Adapter & cable supplied.
Power:
Output: + 15 Vdc @ 2 amps / - 15 Vdc @ 800 ma /+ 5 Vdc
@ 5 amp,
Input: Universal 100 – 240 Vac 47 - 63 Hz, 1.2 amps.
Switching power supply. Supplied. Note: Only use IPS model
HUP45-32
Mechanical:
19” x 3.5” x 10.0” (WHD) / Weight: 8.0 lbs.
