Airplane Maintenance Manual
Bristell
B23
Chapter 55
Chapter 55 Page 4
Issue: 30-Sep-2020
▶
Pull out the stabilizer in horizontal direction off the
mandrels (2) and store it in such a way that a damage
cannot occur.
Installation
Tools needed:
wrench size: , 7/16 in
screwdriver
pliers
▶
Clean mandrels on the fuselage and apply lubricant
grease on it.
▶
Put the horizontal stabilizer from behind to the fuselage
so that it slides on two mandrels on bulkhead No. 12
▶
Install the brackets (5) and secure with the 4 bolts (4),
install washers and secure with nuts.
▶
Connect the trim tab actuator wires (see Chapter 27-00-
03) located between the stabilizer and fuselage.
▶
Connect the elevator control rod with the control lever.
▶
Install the composite covers on bulkhead No.13.
▶
Screw back the screws on covers
▶
Check proper trim tab operation and elevator deflections
(see Chapter 20-60-01), adjust elevator deflections if
necessary as per Chapter 20-50-01).