Airplane Maintenance Manual
Bristell
B23
Chapter 05
Chapter 05 Page 6
Issue: 30-Sep-2020
05-20-01 Lubrication Plan
Unit
Area of lubrication
Every 100
hours
Lubricant
Engine
Throttle control cable on the inlet into
terminal (in the engine compartment).
X
Engine oil
Choke control cable on the inlet into
terminal (in the engine compartment).
X
Engine oil
Nose
landing
gear
Landing gear leg in the area of mounting
(lubricator). Landing gear steering control
cable on the inlet into terminal ( in cockpit).
X
Lubrication
Grease*
Main
landing
gear
Brake pad pins.
X
Lubrication
Grease*
Ailerons
Hinges.
X
Lubrication
Grease*
Rod end bearings of the control tubes.
X
Lubrication
Grease*
Uncoated bushings in the bearings if used
X
Lubrication
Grease*
Two-arm control lever in the outer wing and
control lever in the center wing.
X
Lubrication
Grease*
Torque tube bearings in center console in
fuselage.
X
Lubrication
Grease*
Flaps
Hinges.
X
Lubrication
Grease*
Rod end bearings on actuator.
X
Lubrication
Grease*
HTU
Elevator hinges.
X
Lubrication
Grease*
Rod end bearing of the elevator control
tubes.
X
Lubrication
Grease*
VTU
Rudder hinges.
X
Lubrication
Grease*
Cable shackles on the rudder control
cables.
X
Lubrication
Grease*
Trim tab
Tab hinges.
X
Engine oil
Manual
control
All movable links in the cockpit.
X
Lubrication
Grease*
Foot
control
All movable links in the cockpit.
X
Lubrication
Grease*
Cable shackles of rudder control.
X
Lubrication
Grease*
Locking pin for pedal adjustment
X
Lubrication
Grease*
*NOTE: use general purpose grease lubrication (AeroShell Grease 22C or comparable)