Bristell B23
Airplane Maintenance Manual
Chapter 05
Issue: 30-Sep-2020
Chapter 05 Page 7
05-20-02 Periodical Inspection after the first 25 Flight Hours
Aircraft S/N.:
…………………
Total flight hours:
…………
Registration mark:
…………………
No. of takeoffs:
…………
Prescribed works
Made by
Checked by
Engine and Propeller
List of performed operations for engine is shown in
Maintenance Manual (Line Maintenance) for installed
engine
For MTV-34 prop perform daily inspection according to
6.1 Daily inspection, in the Operation, Installation, and
Maintenance Manual, Ground adjustable and
Hydraulically Controlled Variable Pitch Propeller MTV
Remove and check engine cowlings for evident signs of
heat damage or cracks.
Inspect and check tightening and securing bolts on the
engine brackets and the engine mount.
Check the engine mount for occurrence of cracks.
Check the exhaust system (and its attachment) for
occurrence of cracks on the exhaust system and welds
(see Chapter 78-00
Check
). Remove heat exchanger for
full inspection of the muffler surface.
Inspect and clean the fuel filter insert.
Inspect and clean the fuel strainer in the fuel tank outlets
Inspect the composite landing gear for cracks at axle
connection and mounting brackets
Check rudder cable tension is within 33
– 70 lbs
(for newly installed cables 50
– 70 lbs)
Notes:
Date:
.........................
Signature: .........................
