Brave Smyle - C, User Manual

Page: 39 / 58

BRAVE
– user guide
39
5.5 System parametres
Parametr Value Description Default
61 z
Acoustic signalling
(confirmation, error, empty
memory, call termination...)
(0/1)
1
In default the stages of door intercom are acoustically signalling. By parametr
„
z“
you can switch off this signalling. Possible values are
z=0
– signalling is off
z=1
– signalling is on
Parametr Value Description Default
62 v
Acoustic signalling off hook/on hook
(0/1/2)
1
In default is signalling pick up and hang up of the line. If you identify some
problems at certain PBXs you can switch it off by p
arametr „
v
“
. The possible
values are:
v=0
– signalling OFF HOOK / ON HOOK is off
v=1
– signalling OFF HOOK / ON HOOK is on (type 1)
v=1
– signalling OFF HOOK / ON HOOK is on (type 2)
Parametr Value Description Default
63 u Acoustic signalling knocking to call (0/1) 0
In default it is switch off. By activation of this feature you can identify at PBX
calling from door intercom just up knocking into call. Possible values are:
u=0
– knocking to call is off
u=1
– knocking to call is on
Parametr Value Description Default
64 w
Powering from external power supply 12V
(DIP 3,4) (0/1)
0
In version /C only or at version (C) .
In default external power supply is OFF.
Activation has a sense only in cases when door intercom should make some
operation during stand by mode
– relay activation. Relay in mode
m=7 allows
permanent closing even after call termination. Relay mode m=8 allows
activation up DAY/NIGHT mode settings even after call termination. In those
cases you have to provide external power supply to dont flow current at hanged
up line.
The DIP switch 3 and 4 must be in position „on“ to activate this parametr
w=1 . Deactivation - w=0 .