Brave Smyle - C, User Manual

Page: 24 / 58

BRAVE
– user guide
24
mode m = 4
Action
Note Parametr Relay
Button push
Any button different from
311* or 312*
3114
3124
Button setup by 311* or
312*
3114
3124
Mode m = 6
Action
Note Parametr Relay
Button push
Any button different from
311* or 312*
3116
-
3126
-
Button setup by 311* or
312*
3116
3126
Poznámka:
t1
– time activation 1 of relay
(parametr 371)
t2
– time between pulses 1 of relay
(parametr 301)
t3
– time between activation 1 and 2 relay
(parametr 39)
t4
– time activation 2 of relay
(parametr 372)
t5
– time between pulses 1 of relay
(parametr 302)
Tab. 1 Table of relay(s) control
3.3 Person inside building
By person inside building we mean person in telephone connection with
Brave intercom , for example Mr. Scott.
3.3.1 Outgoing call
Outgoing call is a call from door intercom (generated by visitor). After door
intercom dial is ringing a phone inside the building. When you pick up the phone
you can talk to visitor. By code dialling you can activate the relay (
parametr 35 ) -
when relay is setup in mode m=1 or m=5. You also can switch operation mode
DAY/NIGHT (
parametr 45,46 ) and hang up ( parametr 43 ). Door intercom sends
10sec before call ending ( parametr 52 ) alerting tone and you can prolong the
call by dialling special character from phone ( parametr 42 ). By phone hanging
up the call is ended (PBX generates busy tone into the line which is detected
and door intercom hangs up). There is one more option which is hang up the
line by again push of the same button (parametr 4*).