Brave Smyle - C, User Manual

Page: 42 / 58

BRAVE
– user guide
42
5.6 HandsFree parametres setting
Parametr Value Description Default
71 gg
Reception loudness 01-16 (16 is highest)
(SPK)
07
72 ff
Transmission loudness 01-16 (16 is highest)
(MIC)
07
73 rr
Speaker loudness 01-16 (16 is highest)
(TRH)
07
gg / ff / rr
–
numbers are inserted always by 2 digits in range [01-16]
After reception of confirmation
♫ is new value immediatelly active and you can
test it.
Help: except inserting of direct values 01-16 you can add/ decrease amplification
+/- by buttons on phone
*
=
-
and
#
=
+
Limits of maximal and minimal loudness
are acoustically signalling (3 tones as
call termination signalling. When you
dont press any digit within 5sec then
setup value is saved and you hear
confirmation tone
♫.
CAUTION !! We dont recommend factory setting if neccessary.
Parametr Value Description Default
74 c
Soft pass of switching (0/1)
1
In default this feature is off c=0. It is going about character of on line operation
semiduplex switching. In case where character of depresser is too steep you can
make it softer by
c=1 .
Parametr Value Description Default
75 n
Depression of background sound (0/1)
1
In default it is off n=0. When door intercom is installed in noicy environment
(noicy streets,
subway stations, parkings…) then by activation of this circuit
n=1 is
setup level of noice as start level for microphone activation. Then the call
connection is not one way opened. It relates with setup of parametres 71, 76, 77.