Brave Smyle - C, User Manual

Page: 37 / 58

BRAVE
– user guide
37
Parametr Value Description Default
54 z
Hanging up time during REDIAL (1-5)
2
z
– time [sec] for which door intercom hangs up before pick up for REDIAL
(button push during call, busy tone detection) [range 1-5]
Parametr Value Description Default
55 z
Time before start dialling (1-5)
1
z
– time [sec] after door intercom picks up and before start dialling [range 1-5].
This time is different for every PBX but usually all PBXs accepts dial within 2
seconds after line is picked up.
Parametr Value Description Default
56 hh
Number of rings before hang up (04-99)
12
h
– after dial termination calculate number of CRT (control ring tones). When
number is higher than hh then hang up [range 04-99]. Dial is repeated in
case of 2 groups mode.
Parametr Value Description Default
500 x
Middle frequency of tones detector (1-0)
3
(375-475Hz)
501 y
Number of busy tones (2-0)
4
502 z
Time of permanent tone duration (1-5)
3 (3s)
x
–
middle frequency of tones detector
– is suitable when PBX signalling is
unusual:
y
–
minimal number of busy tones neccessary for
detection [2-0], where 0 means 10 busy tones
z
–
minimal time of permanent tone duration (for dial
tone detection on PBX) [1-5 sec]
Parametr Value Description Default
frequency
[Hz]
x - dial
275-375 1
325-425 2
375-475 3
425-525 4
475-575 5
525-625 6
575-675 7
625-725 8
675-775 9
725-825 0