Bracco ACIST CVi CMS2000, User Manual, Page: 84 / 92

Injection Parameter Ranges
System Injection type FLOW
1
(ml/s) VOLUME
2
(ml)
PRESSURE
3
Pounds per
square inch – psi
(Kilopascals–kPa)
RISE TIME
4
(sec)
CL100H,
CMS2000, and
CVi (Cardiac
mode)
LCA 0.8 – 10.0 0.8 – 20.0 200 –1,200
(1,379 – 8,274) 0.0-1
RCA 0.8 – 10.0 0.8 – 20.0
LV/Ao 0.8 – 40.0 0.8 – 99.9
Other 0.8 – 40.0 0.8 – 99.9
Voyager and
CVi (Peripheral
mode)
Pigtail 0.8 – 40.0 0.8 – 99.9 200 –1,200
(1,379 – 8,274) 0.0–1
Selective 0.8 – 15.0 0.8 – 99.9 200 –1,200
(1,379 – 8,274)
Microcatheter 0.8 – 3.0 0.8 – 10.0 200 –300
(1,379 – 2,068)
Other 0.8 – 40.0 0.8 – 99.9 200 –1,200
(1,379 – 8,284)
1. In 0.1 ml/sec increments.
2. In 0.1 ml increments.
3. In 1 psi (1 kPa) increments.
4. In 0.1 sec. increments.
Saline Rate
Automated fi xed fl ow rate of 100 ml/min.
Status Readouts
Contrast Remaining: Real time, total volume in Injection Syringe
Contrast Delivered: Real time, cumulative volume of contrast delivered per case in ml; reset with
each new case. Also reset if power is turned off and on again.
Last Injection: 0-99.9 ml @ 0-40 ml/sec (real time, peak/injection; reset each injection)
Program Control
• In fi nite single level injections
• Variables entered through keypad on display screen for fi xed rate injections
Height
User-con fi gurable positioning system.
May be used as a cart and/or patient table (bed)-mounted system with remote control console.
Injection Parameters
Speci
fi cations
70 Section 8 Speci fi cations ACIST Medical Systems, Inc. P/N 900468-001 Rev. 02