Braaap ST-160, Owner'S Manual

Page: 33 / 84

The importance of correctly running in a new
motorcycle was mentioned in the beginning of this
manual. The correct running in method is outlined
below.
Maximum Speed
The maximum speed during the running in period is
shown in the table.
Engine Speed
Do not drive at a constant engine speed for long
periods. The various parts in an engine wear and polish
themselves to the correct operating clearances during
running in stage. Prolonged full throttle operating,
placing an excessive load on the engine, or any
condition that might result in excessive heating of the
engine should be avoided.
Avoid Driving At A Low Speed
Maintaining a low engine speed (with a light load)
will assist in the wearing and polishing of engine
parts but will not ensure a proper running-in. As
long as the maximum limit of recommended throttle
opening is not exceeded, you should practice driving
the motorcycle in various gears and with proper
acceleration.
Never drive at the maximum acceleration during the
first 1600 km.
First 800 km
At 1,600 km
After 1,600 km
< 5,000 rpm
< 7,500 rpm
< 10,000 rpm
33
braaap Motorcycles /
ST-160 / ST-250 Owner Manual
5. RUNNING IN A NEW MOTORCYCLE